ShenZhen HRT Electronics Co.,LtdH8122+ for NISSAN

C
Products

P
Products

H8122+ for NISSAN

Features:

1. Supports most of the bluetooth mobile phones
2. Complies with the bluetooth 2.0 protocol and facilitates built-in bluetooth audio transmission
3. Suitable for all the cars,vehicles and trucks
4. Suitable for 12-24 volt power application
5. Support the voice dialing via the unit's microphone or of the phones
6. Built-in DSP chip for background noise and echo cancelling
7. Automatically mute the radio when an incoming call and outgoing call
8. Built-in volume control to adjust volume
9. Easy to change conversation mode between hansfree and private mode
10. Supports redialing the last phone number
11. With external speaker for option.

Poduct specifications:

Power supply voltage scope	DC 9～25volts
Working temperature	﹣25℃～75℃
Storage temperature	﹣35℃～85℃
Current consumption	In Operation: 1.ACC ON(during charging+conversation)°800mA～1.5mA(MAX)/DC 12V In Static Mode: 1.ACC ON(during charging+conversation)°～800mA (MAX)/DC 12V 2.ACC ON(mobile is not connected)°～800mA (MAX)/DC 12V 3.ACC OFF°～0mA
Microphone (including amplifying circuit)	l Category:FT105A Directional l Sensitivity:50Db±4Db tolerance l SN ratio:﹥55Db(Min) l Frequency response:100-16 KHz
Amplifier output (loudspeaker drive)	l Output power:5W RMS 35W(Max) l Impendance:4 Ohm l Max output current:2.6A l Max undistorted amplitude:8Vpp
Mute Mode	LO_MUTE Operating Current:50Ma(Max)
Bluetooth DSP	Full Duplex,Noise Reduction,Echo Cancellation
Bluetooth module	Conform to Bluetooth Headset Profile v2.0,v1.1
Transmisstion specification of Each terminal	Terminal connecting to the vehicle bodyline ﹥Batt: l Supply Voltage: 9～25volts l Supply Current: 3A(Max)